Common Faults of PTC Heaters
Jan 28, 2022|
View:50PTC HeaterIt is a commonly used heating equipment, which can be used for heating solids, air and liquids. If the heating process is not handled properly, it will cause many faults and shorten the service life of the PTC heater, so we must first understand the possible problems.
1. After applying for a period of timePTC HeaterUnable to heat: In this case, the heating wire inside may be broken. You can connect the broken wire or replace it with a new one. It may also be loose and cannot make contact, so you need to retighten it.
2. During the application of the PTC heater, the heating tube may break, and then the heating tube needs to be replaced.
3. PTC heater leakage: If the insulation effect is not good, there may be a problem with the electric heating tube, which needs to be replaced; if water enters the junction box or the insulation of the wire is damaged, electrical leakage will occur, especially when heating liquids. It is necessary to blow dry and wrap the damaged area with insulating tape.
4. After the PTC heater fails, the cause must be found and solved in time. In the future, when using electric heaters, if you encounter problems, you must deal with them properly to avoid danger.
PTC HeaterIt heats up quickly and is conveniently designed. It can be used in any power range, and the safety hazard is relatively small. Changzhou Ainuo Electronic Technology Co., Ltd. focuses on temperature control and diversifies its development. If you are interested in learning more about PTC heaters, please call: 13506120522.
