PTC heater is a special type of electric heating device, which differs from general resistance. The resistance value of PTC heater increases significantly with the increase of temperature. So what are...
A thermal protector is a sensor used to protect circuits or equipment from abnormal conditions such as overload, overheating, and short circuits. It is usually composed of one or more thermal resistor...
When the motor thermal overload switch is in a closed working state, the movable contact maintains close contact with the static contact under the pre-pressure caused by the bending deformation of the...
Thermal motor protection is a thermostat consisting of two different alloys that automatically close/disconnect the contacts when the temperature drops to a set temperature, returning them to normal w...
Industrial Thermostat Controller has the advantages of low thermal resistance and high heat transfer efficiency. The utility model is an automatic constant temperature energy-saving electric heater.
Use the Motor Thermal Protector method Motor Thermal Protector, Motor Thermal Protector is a kind of protection device based on the expansion coefficient of bimetal.
PTC air heater is also called PTC heater, which is composed of PTC ceramic heating element and aluminum tube. It has the advantages of low thermal resistance and high heat transfer efficiency.
The resistance of the ptc air heater thermistor increases or decreases with the change in ambient temperature, so the ptc air heater has the characteristics of energy-saving, constant temperature, saf...
The difference between Thermal Protector for sale and current overload Protector Overheat protection, refers to the temperature above a threshold when the start of the corresponding protection functio...
17AMT Thermal overload protector switch is a kind of over-current overheat protector, which is characterized by small size, quick disconnecting action, and used for accurate control (motor, transforme...
Considering the safety and reliability, PTC thermal protection is safer, has higher insulation voltage, lower leakage current, and is more stable than traditional electric heating lines.
PTC air heater for heating can overcome the shortcomings of electric heating wire heater, insulation withstand voltage, leakage current, insulation resistance excellent stability, no ventilation, auto...
At the beginning of heating, the power of the PTC air heater increases from small to large, reaching a peak, then gradually decreases, and then stabilizes.
PTC air heaters are automatically thermostatic, and more energy-saving, compared to other electric heating tube heaters are safer, it is not easy to cause burns or fire.
hope that the thermal motor protection function diversification, reliable performance, simple wiring, intuitive interface, and small volume, these are pure analog lines can not be achieved.
Thermal motor protector is a combination of two different alloys together, through the current will heat, because two different alloy thermal expansion coefficient is different, the alloy is bound to ...
We all know that sensors have phone temperature sensor, car sensors and so on, but with the development of intelligence, the application of sensors has been gradually applied to the work of robots.
680
